krotpitch.blogg.se

#2 lan 2 wan asa 5505 cisco how to how to#
#2 lan 2 wan asa 5505 cisco how to software license#
#2 lan 2 wan asa 5505 cisco how to Pc#
#2 lan 2 wan asa 5505 cisco how to license#

When the wizard takes you to the FirePOWER network settings, enter IP address 192.168.1.2, Mask 255.255.255.0 and Gateway 192.168.1.1 (see below).Select “Startup Wizard”, leave username/password fields empty and hit OK.

#2 lan 2 wan asa 5505 cisco how to Pc#

Launch a web browser on your Management PC and go to.

The quickest way to manage initially the device is using ASDM.

The outside interface (GE1/1) must be connected to the WAN (ISP) device and will receive IP address dynamically by default (via DHCP).

You must connect both GE1/2 (inside) and Management1/1 interfaces on the same Layer2 LAN switch.

You must configure an IP address for Management1/1 in the 192.168.1.x subnet (e.g 192.168.1.2) inside the FirePOWER module (or via the ASDM GUI as we’ll see below).

The default “inside” IP address for managing the ASA is 192.168.1.1 (interface GE1/2).

DO NOT configure an IP address for the Management 1/1 interface inside the ASA configuration.

The Management 1/1 interface belongs to the separate FirePOWER module and NOT to the ASA.

In order to deploy the device in your network and be able to start its initial configuration, connect it as following:

#2 lan 2 wan asa 5505 cisco how to how to#

How to connect the ASA 5506-X in your network for Initial ConfigurationĪs you can see in the specs section above, there are 8x1G network interfaces and also one Management interface (Management 1/1) which belongs to the FirePOWER module. For example, Anyconnect needs extra license, IPS requires subscription etc. They made licensing too complex in my opinion so you must conduct your reseller for more details and to avoid any “surprises”.

#2 lan 2 wan asa 5505 cisco how to license#

You should contact your local reseller and ask about License cost, “right-to-use” subscriptions needed etc. Note Regarding Licenses and Subscriptions:

With extra subscription cost you can have also Next Generation IPS, Advanced Malware Protection and URL filtering.

Comes with FirePOWER Services (Application Visibility and Control – AVC) which supports more than 3000 application-layer and risk-based controls.

Active/Standby high availability (only with Security Plus License).Unlimited internal hosts (even with the Base License).10 IPSEC Site-to-Site VPNs (Base License) and 50 VPNs with Sec.5 VLANs with Base License and 30 with the Security Plus License.Max 20,000 concurrent sessions with the Base License or 50,000 with the Sec.Plus License.300 Mbps for only firewall services, 250 Mbps for Application Visibility and Control (AVC), 125 Mbps for Application Control (AVC) and IPS/NGIPS, 100 Mbps for VPN throughput. Performance throughput varies according to what services are enabled.1 Management Interface (for the FirePOWER module).8x1GE Network Interfaces (these are routed ports, not switch ports like the previous 5505 model).

#2 lan 2 wan asa 5505 cisco how to software license#

It comes in two software license “flavors”, the Base License and the Security Plus License.It comes in two hardware “flavors”, the normal 5506-X and also the 5506W-X which has an integrated wireless access point (a/b/g/n bands).Cisco ASA 5506-X Specs and Featuresīefore starting the discussion on how to configure the 5506, let’s first see the most important specs and features of this model. The second case is more advanced and will cover two DMZ zones, one with a publicly accessible Web Server and one with a Guest WiFi Access Point. One is a simple scenario of providing internet access to an internal LAN. I will cover two popular use cases of the 5506-X. Since these are useful posts for many people, I’ve decided to write also a configuration tutorial for the new ASA 5506-X. One of the most popular configuration guides on this blog is this basic ASA 5505 tutorial.